Microwave Filter Company, Inc.
International Calls: (315) 438-4700
Toll Free: (800) 448-1666
mfcsales@microwavefilter.com

"Committed to Excellence" Since 1967



An ISO 9001:2008 Registered Company
LinkedIn  
    Get a Quote Subscribe to MFC E-Mails

Home >Microwave components>Power Dividers/Splitter

Power Dividers/Splitter

An N-Way Wilkinson power divider (splitter) has a single input port and N in-phase output ports ideally of 1/N times the input power. The input match (VSWR) of the divider is dependent upon the reflection coefficients (match) of the output terminations. Thus, the isolation between output ports is determined, in part, by any load mismatch. Since power dividers are reciprocal devices they may also be used as combiners. Power handling under mismatch loads is limited by the internal resistor rating. Power dividers are generally more broadband than hybrid couplers with better amplitude balance. We now offer Low PIM (Passive Intermodulation) versions of our power dividers.


4 Way Power Divider
Common Specifications:
VSWR 1.31:1 Max
Power: 50 Watts
Impedance:50 Ohms
Connectors: N female
Relative Humidity:5% - 95%
Technical Specifications:

Model Number

Frequency Range:
Insertion Loss:
Isolation: PIM
Operating Temp.Range:
PD-6927-050-02NF
DATA SHEET
698-2700 MHz
3.5 dB Max
20 dB Min -155 dBc @ 2 x 43 dBm
35°C to +65°C
PD-6727-050-02N
DATA SHEET
670-2700 MHz
3.4 dB Max
20 dB Min NA -35°C to +60°C
PD-6927-050-03NF
DATA SHEET
698-2700 MHz
5.4 dB Max
19 dB Min -155 dBc @ 2 x 43 dBm
-35°C to +65°C
PD-6727-050-03N
DATA SHEET
670-2700 MHz 5.5 dB Max 20 dB Min NA -35°C to +60°C
PD-6727-050-04NF
DATA SHEET
698-2700 MHz
6.6 dB Max
18 dB Min -155 dBc @ 2 x 43 dBm
-35°C to +65°C
PD-6727-050-04N
DATA SHEET
670-2700 MHz
6.5 dB Max
20 dB Min NA
-35°C to +60°C
Back To Top

Toll Free: (800) 448-1666
International: (315) 438-4700
Fax: (315) 463-1467

6743 Kinne Street
East Syracuse, New York 13057
Website: www.microwavefilter.com
Email: mfcsales@microwavefilter.com